Home
Industrial heat pumps

Industrial heat pumps

Industrial heat pumps — are heat pumps with a capacity of 30 kW and above. The principle of operation of such devices does not differ from domestic heat pumps and is based on the transfer of scattered ambient energy to the heated room through an intermediate freon heat exchanger. To buy an industrial heat pump at a favorable price, you just need to call Reneco specialists at the phone numbers listed on the website. When ordering equipment and installation in our company, the development of project documentation is taken into account as an additional discount. We work only with trusted manufacturers. We deliver equipment and perform installation work throughout Ukraine. All equipment and works are guaranteed.

Air to water heat pump RICOS MURANO AW2 42

No	Characteristic	Value
1	Type of system	"Air-water"
2	Heat output	41.46 kW
3	Power consumption	11.94 kW
4	Conversion coefficient of the COP	3.47
5	Supply voltage	380В
6	Compressor	EVI Scroll
7	Refrigerant	R407C
8	Minimum ambient temperature	-20°С

Brief description:

Designed to provide heating, hot water preparation and cooling
Ability to operate down to -20 ° C
Maximum water heating temperature up to 60 ° C
Scope of application: cottages, office premises, hotels, shops, etc.
Warranty: 5 years
Country of manufacture: Slovakia

Air to water heat pump RICOS MURANO BAW / B 13033

No	Characteristic	Value
1	Type of system	"Air-water"
2	Heat output	137.04 kW
3	Power consumption in heating mode	33.26 kW
4	Power consumption in cooling mode	38.64 kW
5	The conversion coefficient of the COP is	4.12
6	Maximum cooling capacity	120.63 kW
7	Power supply voltage	380V
8	Compressor	3 pcs.

Brief description:

Designed to provide heating and cooling of industrial premises, as well as hot water production in residential buildings
Ability to operate in heating mode down to -24 ° C
Easy to maintain
Application area: shopping centers, industrial premises, office and commercial buildings, hotels
Warranty: 5 years
Country of manufacture: Slovakia
Weight of the outdoor unit: 345 kg
Indoor unit weight: 502 kg

Air to water heat pump DAIKIN SEHVX64BAW

No	Characteristic	Value
1	Type of system	"Air-water"
2	Heat output	62.7 kW
3	Power consumption in heating mode	21.4 kW
4	Power consumption in cooling mode	25.5 kW
5	The conversion coefficient of the COP is	2.93
6	Maximum cooling capacity	63.3 kW
7	Power supply voltage	400V
8	Compressor	Hermetic scroll compressor

Brief description:

Designed to provide heating, hot water preparation and cooling
Ability to operate down to -20 ° C
Maximum water heating temperature up to 60 ° C
Scope of application: cottages, office premises, hotels, shops and TDs
Warranty: 5 years
Country of manufacture: Slovakia
Weight of the indoor unit: 502 kg
Weight of the outdoor unit: 345 kg

Industrial air-to-water heat pump

The pump extracts heat from the air and then heats the water (heating medium) to the required temperature through an intermediate Freon circuit. Such heat generators operate on low-temperature heating systems designed on the basis of fan coils and/or heaters selected for the respective systems.

Industrial air-to-air heat pump

The pump takes heat from the outside air and heats the air directly in the room, the temperature of which rises due to the transfer of heat through an intermediate freon circuit. Such a pump provides heating in the cold season and works like a conventional air conditioner in the hot season. They are widely used in hotel construction.

Industrial groundwater heat pump

An industrial groundwater heat pump transfers the received heat energy to the heating medium of the heating system using the same principle. This heat generator extracts heat from the soil, which is able to give off heat regardless of weather conditions, since the soil has a constant temperature.